Column Shift Linkage

yellowdartdave 8 3/4 posi and driveshaft for the combo all in, just have to track down shifter linkage for a 4bbl,V8,727 colum shift. I believe most 318 cars had a 904 trans in 1973 cars, not sure if all 1973 cars with 360 had 727 or was it 904. probally earlier years with same combo iam after would work hoping someone will chim in. Thxs


I did use the Z bar type shifting linkage of the six cly, just had to make fabricate the tab which goes on the ear of the tranny,your old tab will work if you redrill the bolt hole and put the bolt hole in the opposite way, it did work out OK for me, But you have to use the two piece kickdown linkage, this linkage bolts into the 9/16 screwin hole it is above the ear tab for the shifting linkage, two other rod branch off it ,the rod going up the fire wall and the other goes to the kickdown lever on the trans. gl