64 DART 4 way flasher wiring

Flat connectors through '63. Box-and-point connectors starting in '64. This what you bought will fit right into a '62-'63 A-body, but you'll have to do some hacking if you want it to fit your '64. You'd need to get the male and female plastic housings (one of each, as in your picture) from a '62-'63 car. One would be at the end of the turn signal switch wiring, the other would be its mate under the dash. Then remove your '64's housings, cut off the box-and-point terminals, install the flat terminals, install the wires with flat terminals in the housings, and then you can install this hazard harness in your '64. Alternatively, install a '62-'63 turn signal switch that already has the flat connectors, leaving you in need of changing only the under-dash connector. And, um, finding the switch those flying wires are supposed to attach to! :shock: Alternatively, see here.