New P-S-T Torsion Bars Do Not Fit

I installed PST torsion bars at Christmas time. I had the same issue with mine.

I removed the old bars. New ones wouldnt go right in because of the clocking issue. I had a second person slowly lower the car with jack stands under the lower control arms untill the "torsion bar housing" was lined up with the torsion bar end. Then pounded in with with small wood block and small sledge hammer.

Everything was greased etc. If I were to do it again I would remove the paint from the torsion bar ends. The paint on the ends made the fit a lil tight.

Bad Shrimp