Possible NA /6 build: tips/advise/opinions wanted

Keith Black sells a nice hyper piston for the 2.2 Chrysler 4 cylinder engine that works in the 225 with the 198 connecting rod.....or the K1 connecting rod which is what I am going to use. Rods are a little pricey.....but you get what you pay for. By the time you recondition stock rods and add good rod bolts and bush them for floating pins, you are at the same cost for the good rods. The KB239 will get you in the 10:1 range with the 198 rod real quick. I have less than 275 bucks in my pistons. They are real nice.