Heads for the 318

I'm thinking about what to do with my heads. I mean, what type of porting, valve sizes, polish or not... I'm thinking abour 1.88" / 1.60" valves but I'm not shure, it's the most common. Maybe a 3 angle valve job.. I don't know... :angry7:

Engine specs:

-318 bored 0.30 over
-The heads are milled 1mm, so the compression is about 9.8/1
-Mopar 284 solid cam - [email protected]" and .528 lift - 112 lsa
-Edelbrock Performer RPM intake
-Holley 650cfm double pumper
-Headers and 2.5" exhaust with X-pipe



Thanks