headlights

It sounds like you get what you pay for..Ciebies, Bosch, Lucas (an american company now)....

How to Swap LED Bulbs to Current Halogen Bulbs

This simple process requires the same steps on how to replace conventional halogen headlight bulbs. The basic steps are as follows:

Materials Needed:

* LED headlamp bulb (according to size and specification)
* Cotton Rag

Step 1 - Preparation and Removal

It is best to work with a cool engine. Lift and support the hood with the hood stand. Disconnect the headlight socket bulb located on the back of the headlight assembly. Remove the protective covering and unhook the lock that holds the bulb in place and remove the bulb.

Step 2 - Insert LED Headlamp Bulb

Inspect the LED headlamp bulb and make sure it is the correct kind and type for your vehicle. Headlamp bulbs come in different configurations such as H4, H3, H7, etc.

The LED headlamp bulb will look different than your ordinary bulb. It comes with 2 to 4 separate panels to hold the diodes in place. Insert the bulb to the headlight assembly similar to how the old bulb was fitted.

Step 3 - Reconnect Socket

Secure the bulb by locking the hook and insert the protective covering before connecting the socket. Turn on your headlamps and test for performance. You may have to aim the alignment of the beam for better performance and to avoid dazzling oncoming traffic. Refer to your owner's manual or repair manual regarding the procedure. Also check that you compling with all related laws for your state, province or place of residence.

Chow
Grassy