​

When he showed me that can I thought..............

Oh, you spray the part A on first, wait 15 minutes, then switch the spray nozzle to the opposite end of the can and spray on part B.


That is not how it works.................

There are two chambers in the can, that thing on the bottom is not for the nozzle.

They give you a hard plastic cap that you slip onto that post on the the bottom of the can.

You shake the can like crazy, then you mount the hard plastic cap on the bottom and push hard.

A long needle pushes up and pierces the wall between the two chambers and part A & B mix, then you are good to go.

Reed has done Many of these wheels over the years, he said this UV shielding clear coat looks just like the two part marine UV clear that he always used in the past.

I thought I would pass the info on.
.​