Rebuilding engine/ head gasket compression question

The 107's worked great in my 360. I would also look at using a cam like a comp cams 280H cam. I used a stock converter with it and drove it everyday on the street. It was a great set up and ran like a bat outta hell. One thing I would make sure that I did is put a good set of rod bolts in it and have fun. I had alot of maching work done on my motor and spent very little in parts. The car would run (leaving in second gear) 13.94 @104 in the 1/4. I don't care who you are on pump gas and street tires and no posi that is not bad at all.