Drive Like You Stole it... I did and I will....

I bought some cheap headers just to break in my motor and to get it running.
Just trying to save some money to get this project finished.Well it was a big mistake but I will roll with the punches and never do it again.I spend most of the afternoon today installing them at my full equipped shop.
Driver side had clearance problems with manual steering box,torsion bar and of course Milodon pan.I bent them in with air hammer and I believe with out Milodon pan they still would not fit.Here are some pictures.
Also found some loose bolts on suspension and corrected them.
Had to pull oil filter adapter to install right side header and found no gasket to the block,corrected that after installing headers.I am going to have redo and recheck everything this previous owner did.Pinion angle is off,pointing down with weight of the car on it.I believe the shims were installed backwards and I think he got SS springs on the wrong sides.Oh well not bitching,just want to get it right....Not finished tweaking headers,need more clearance at pan and steering box...Can not wait till next weekend.