Is there any specific way to remove a stuck torsion bar, or its the pipe wrench the best method? I have done this a few times, had one stuck on my Dart (hitting a curb didn't help tho) and I resorted to a pipe wrench and hammer to get it out
If you had the tool specified in the first post, you would be able to hammer it out.
I would imagen a pipe wrench and a hammer will really leave marks and scratches on torsion bar which then MUST be removed or bar may break!
That tool may still be available somewhere, but on another thread showing home-made tools, someone showed a piece of angle iron with two taped up U bolts to clamp on torsion bar, then you can hit angle iron with a hammer!
Should drive it out.
