Yet another cam recommedation thread...

I dug out the dial indicator, but couldn't find the degree wheel, so all I have are lift figures. I haven't had an opportunity to pull it down further yet.

The intake shows .320 at the lobe and the exhaust .338. I figured that to be about .480 and .507 at the valve with 1.5 rockers.

I should probably mention that I'll be using the 1.6 hughes rockers I picked up for my old 318.

I also got a response from Comp recommending their XE284 cam, so the cam manufacturer recommendations are all over the place for this thing.