1964/1965 woodgrain steering wheel

-
Status
Not open for further replies.
maverick

maverick

1964 BARRACUDA 273-5sp.
Joined
Jan 14, 2007
Messages
53
Reaction score
1
Location
Baghdad, IZ
Rating - 0%
0   0   0
Contact seller
Hello everyone,

I am looking for 1964/1965 Plymouth Barracuda wood-grain steering wheel in decent/good condition.

Please email me if you want to sell yours or if you know of anyone who wants to unload one.

Thank you in advance! :cheers:
 
maverick said:
Hello everyone,

I am looking for 1964/1965 Plymouth Barracuda wood-grain steering wheel in decent/good condition.

Please email me if you want to sell yours or if you know of anyone who wants to unload one.

Thank you in advance! :cheers:
Click to expand...
Theres 1 listed in parts for sale for $75 looks good to me better look soon or it will be gone good luck
 
If you can find a decent 64-67 wood grain wheel for $65-$75, you better not hesitate. That is a dirt cheap price, $200-$300 is closer to reality, especially if it has the correct horn button and hardware.
 
blown fish u are correct i have a nice wheel with 1 crack and nice chrome and cap i offered for 325.00 shipped and i was told i was too high thanks for the confirmation
 
superdart340 said:
blown fish u are correct i have a nice wheel with 1 crack and nice chrome and cap i offered for 325.00 shipped and i was told i was too high thanks for the confirmation
Click to expand...


Yeh, there are a few out there that think they can still find them in the local salvage yard for $50 and I'm sure they do pop up on the forums occasionally for a cheap price by some that just want to get rid of them, but I haven't seen a decent wheel go for under $200 in a long time. I have 3 or 4 hanging in the garage and I wouldn't even consider selling one for $65-$75 unless it was pretty cracked up, and even then I think I would just save it for a driver.


Sorry Mavrick if I tainted your thread, I should have sent a PM. I just wanted to let you know not to hesitate on the couple that were posted, those prices are good even for one that is pretty cracked up.
 
I have two of these wheels, one I rounded up a nice chrome center and went to put it on my 66 and the steering shaft is too thick, tried it on my 65 and found the same thing, steering shaft too large. Could or would these wheels be of a 67 & up or ???....

Dave
 
GTGrinly said:
I have two of these wheels, one I rounded up a nice chrome center and went to put it on my 66 and the steering shaft is too thick, tried it on my 65 and found the same thing, steering shaft too large. Could or would these wheels be of a 67 & up or ???....

Dave
Click to expand...

As far as I know, the 64-67 A & B-Body wheels are the same and the 68-70 B-Body and 68-69 A-Body wheels are the same. Are you sure the wheel you have is a Mopar? there are some GM wheels that look exactly the same.
 
I'll check for part nmbers, but they are both identical, one was bought off ebay as a Dart wheel and the other off FABO as a Barracuda wheel.
 
BlownFish, you've pretty much ruined my thread.. THANKS A LOT!!! ....@!#%$^&XZ?><*&^%$!! :munky2:
Perhaps, next time you could start YOUR OWN thread under "educational thread"?
 
maverick said:
BlownFish, you've pretty much ruined my thread.. THANKS A LOT!!! ....@!#%$^&XZ?><*&^%$!! :munky2:
Perhaps, next time you could start YOUR OWN thread under "educational thread"?
Click to expand...

blownfish, not all of us are rich and if someone offers a part below what it normally sells for don't hiijack the thread and tell everyone including the sellers that they are more aless crazy for selling at that price! I would be pissed if I was maverick. I think an appology is owed
 
maverick said:
BlownFish, you've pretty much ruined my thread.. THANKS A LOT!!! ....@!#%$^&XZ?><*&^%$!! :munky2:
Perhaps, next time you could start YOUR OWN thread under "educational thread"?
Click to expand...

66plyValiant said:
blownfish, not all of us are rich and if someone offers a part below what it normally sells for don't hiijack the thread and tell everyone including the sellers that they are more aless crazy for selling at that price! I would be pissed if I was maverick. I think an appology is owed
Click to expand...

Wow, people amaze me. :angry7:
 
Blownfish said:
As far as I know, the 64-67 A & B-Body wheels are the same and the 68-70 B-Body and 68-69 A-Body wheels are the same. Are you sure the wheel you have is a Mopar? there are some GM wheels that look exactly the same.
Click to expand...

the diameter base of the 68 and 69 are different than the earlier ones,and 70 is all by itself.as far as the shaft I would have to say they are the same ,I took off a wood wheela nd put one of my old 68 roadrunner wheels on my 66 and I' putting the wood wheel on my wagon.the first one is the original cracked to pieces wheel
 

Attachments

  • 66 stick 001.jpg
    125.2 KB · Views: 223
  • int. 001.jpg
    129.4 KB · Views: 213
  • tach 002.jpg
    97.9 KB · Views: 188
I'm gonna risk an "educational" post in this thread by mentioning that the woodgrain wheel from a '66/'67 Charger is the same as well. Lots of those cars got the wood grain wheel, so they're a bit easier to find. Try a search for that. You just need the correct horn button and mounting ring. The Charger mounting ring won't work.
 
yellow68runner said:
the diameter base of the 68 and 69 are different than the earlier ones,and 70 is all by itself.as far as the shaft I would have to say they are the same ,I took off a wood wheela nd put one of my old 68 roadrunner wheels on my 66 and I' putting the wood wheel on my wagon.the first one is the original cracked to pieces wheel
Click to expand...

Looks best with the woodgrain.
 
Status
Not open for further replies.
-

Back
Top