A friend asked me to buy this for him when I get home. Pretty cool, not Mopar though

well i ride an atv so im in no way an expert. but my stock ford f150 had 4.11s and when i mentioned 33 12.5, r15 they suggested bump up to 4.56. but while on my atv i follow the big mud trucks around theres a 79 ford on 40s, an 10 on 38s with a stroker. both trucks are in the 10k + build zone. buth run half ton axles. idk the more mechanical stuff like wat gears theyre running and such, but they do pretty well but youll get stuck sooner or later. now 49 inch iroks are another story, iroks grip hard so breakage is highly likely if mudded hard. 10k is aot to throw at a truck but the hard stuff has been done. lift, tires alone will run you in 5k zone, the clean body itself is rare so thats body work knocked out and paint is done and done beautifuly. so if you have 10k hes not asking a ridiculous price for wat it is as long as it runs and the motor is clean and solid. if he wants a mall crawler its great itll get alot of attention both good an bad i dont remeber if it has steering stabilizers but it will need them. and if he wants o mud it throw out the danas and get a set of rockwell duece and a half axles, and get it to make more hp. so my advice based on wat ive seen in the pit and such. mall crawler: hell need bigger gears, that compare and match up with the 390. mud monster: rockwell axles, way bigger gears, more hp a bigger motor if need be. so it really comes down to wat he wants it for. again just my .02 if im wrong on anything please correct me.