What kinda wiring and relay for fuel pump?

Ok, I think I got it figured out. Holley has a few pages of info on this topic.
Here is their relay kit:
http://www.holley.com/12-753.asp
and here's the PDF instructions for it:
http://www.holley.com/data/Products/Technical/199R7914-3rev2.pdf
All their fuel pumps are listed here: http://www.holley.com/types/Electric Pumps - Carbureted.asp
I think I have the blue one. Either way, the pump that draws the most current looks like it only draws 4 amps. (The 'black' pump. I know mine is either red, blue, or black, and those pumps draw 2, 3, and 4 amps.)
So according to holley, you should use either their kit or an equivalent 4 wire relay. Well I picked up a 4 wire, 30 amp relay from advance auto:
http://www.autozone.com/autozone/ac...2-Volts-universal-relay?itemIdentifier=203873
and I also got some 10g wire, a fuse holder and fuse.
Will this relay work? I don't see why not... holley's is a 30 amp, 4 pin relay and so is this. Now if I understand correctly, I have to wire everything like this:
Wire from starter 'nut' to inline fuse. From inline fuse to relay. Then ignition wire to relay. Interupt the wire from the ignition to relay with a switch. Wire from switch to the pump. (And obviously ground everything that needs to be grounded).
Is this right?