71 Duster: how do you remove metal and vinyl trim under pop-out windows?

Hmmmmm. Good info and thanks. I do have the chrome strip between the vinyl panel and the metal panel that one of you referred to as a "sail".

I'm still trying to picture the retaining clips in the side panel before I start to pry. I seem to recall pulling off a panel on the driver's side door many years ago and it was a wire-like spring clip that protruded perpendicular from the panel and passed thru and undersized hole in the metal on the door. Is that the type of clip you recall seeing?

If yes - then I assume that I need to slide a flat bar as far as I can under the front edge of the panel and pry away from the side (towards the opposide side of the car).

Does that sound right?

Thanks also for the tips on the headliner installation. I need to get orgainized and save these responses where I can find them when when I buy hardware for specific tasks. I'm currently in the taking-apart stage and I have already collected info on rebuilding door hindges, dealing with rust, and a replacement air conditioning system. Lots to do and a doggone full time job and a yard to work around my car project. :-)

Thanks again for your help.
Ken