Hey guys help me choose a cam....hyd roller or solid ?

Great SB forum here, lots of good info !!

Ok so I have this little 360 combo in a Street/Strip appn, A body 3300/3400lbs and was really wanting to add the right stick for the combo....

Engine combo is pretty much fixed, a little more CR would be nice but this would necessitate a piston swap and if I do that I may as well swap out to the better RHS heads which I don't want to do atm :-D Prefer to refine what I have till the new engine is finished.

Combo is as follows:

360 + .030"
KB 232s, plasma rings, .040 quench, 9.4:1 CR
Beam polished factory rods, ARP bolts
Bowl/ported J heads,230 cfm @ 28"H2O, max out at aprox .500", 11/32" 2.02/1.60 valves, 1.5 needle rollers.
LD 340 intake, port matched, fabbed oil splash shield under intake, 2" 4 hole spacer for plenum volume
750DP or 830 Holley Annular carb
MSD Digital 6 ign/dist
4-1 1 3/4" headers , 3" collectors
FMRP 727 TF, 3500 stall (have a 4800K stall as well)
4.56 gear, 31 sp Moser axles, Detroit Locker, 29.5" slicks at the track.

Id really appreciate your ideal cam selection for this combo based on what I have. I've used the Cam Quest software but am more interested in all you SB guys with real world experience with the appropriate cams and how/what did they run.

Hydraulic, Solid or juice Roller and what spex, considering the heads/CR/intake/header/gearing combo?

Thanx in advance guys....

Rat