New harness problem

My old harness was a total mess. I replaced it all with a new one from Year One.
It was easy, but time consuming, to install the harness.
But now I´m stuck with a problem or problems.

This is what happends when I put
the parking light on:
Both the rear lights function but front parking lights doesn´t lit

the low beam on:
Both the front and rear lights works

the high beam on:
Both the front and rear lights works

the hazard lights on:
Only the right rear works

the hazard lights and the parking lights on at the same time:
Right rear and the two front flashes. Left rear only lit.

the hazard lights and the low beam on:
Right rear works. Left rear only lit.
None in front works.

Brake lights:
Only right rear works

and

The internal indicator lights for turn signals in the dash lights steadily
except
When I push the indicator downwards to “turn left” the right indicator lamp is lit
and vice versa turning right

Also have a problem with overheating cable
A cable at/behind the dashboard smokes when key is turned in to second stage. I haven´t figured out which one yet. Stopped working when I smell the smoke. Have to take down the cluster to see which one it is.

I have looked in the service manual for my ´67 Valiant but I can´t find an over all solution to the problems.