post badest stock stroke small blocks

Well it won't be a stock stroke much longer but here it was.

MP high compression 360 LA short block
Stock crank, stock rods, Milidon rod bolts and ARP main studs
Hyper flat top pistons .011 out of the hole
FelPro 1008 .039 gasket
ARP head studs
W5 ported 2.02/1.60 small chamber heads cut .050 for a 47cc chamber
305 cfm at .650
Hughes flat tappet .630/.630 277/283 @ .050
Crane gold race rockers 1.6:1, makes net lift at valve .650
I don't remember whose valve springs they are but they are 148 on the seat and 440 over the nose.
Crane 3/8 custom length pushrods
M1 W5 tunnel ram
2 Demon 750 TR carbs, 79 jets all around no power valves.
Moroso deep pan standard oil pump
2" primary tube headers, pretty short at around 29" long, 4" collector with turn downs.
7500 in the water, shift it at 7200.
4200 Turbo Action 8" converter, 4.86 gears 14.5/32 slicks, car weighs 2600 lbs with me in it.