318 power potential?

Alright so I know there is a lot of speculation in this, and a lot of opinions. But I would like to see what everyone puts my engine at, I plan on taking it to the dyno in a couple of months, but that is when money comes in.

The current set up is

318 bored .040 over (Pistons do not sit down in bore)
.024" head gasket
61cc J heads with 2.02X1.60 valves
Cam specs are (Edelbrock performer RPM)
308/318 advertised duration
234/244 duration at 050"
.488/.510 lift
112 lobe separation
Roller rocker arms
Weiand high-rise dual plane intake manifold
Hooker headers 1 5/8
600 CFM carb
electronic ignition with orange box

With all of this plugged into DYNO2003 I come up with
389 torque at 4,000 RPM
356 horsepower at 5,500 RPM

I was being honest on everything when I plugged it in as well, as fun as it is to play with it.
I expect those numbers to be a little happy, but just curious as to what everyone thinks, have any more questions just ask.