Home made sandblast cabinets..lets see them

Making progress, got the new angle on the legs, somewhere around 35* which dropped the front leg around 2". I cut my arm holes with 17" spacing due to my love handles. Holes are approx 5" diameter. Im going to put "sleeves" I made from duct work. They are just set in there, I will screw them in later. I cut the window as well. 36" wide by 10 1/2" approx. 6mm laminate glass is about $3 per sq ft, but should last quite a while. ABS and filter for the shop vac should work well. Im gonna pick up the glass tomorrow, so hopefully will be able to add a bit more to this thread. Getting there, and I think I got the dt's from no sand blasting!!