hard shifting 833

mbaird said
I used a roller pilot bearing ,so that should not be the problem . (?)
as for the clutch adjustment , how much play should I have and what
is the best way to measure it?

BTW, it is recommended to remove the over center spring when running
a diaphram clutch. HOW IN THE HELL DOES ANYONE SHORT OF HERCULES GET THAT THING OFF !!!
Click to expand...

Okay as long as the shaft is centered well, you should be good to go there. I think you should have about an inch of freeplay at the pedal which measured at your adjustment rod should equal about 5/32`s. As far as the spring just be careful and use a long lever in there to remove it.