dodgedifferent2 67 dart progress

still doing a bit of work on the dart

I have cut the wheel tub on the passenger side after scrapping the undercoating off. I almost have the 2 1/4 inch strip welded back in. I keep forgetting to take the camera outside.

I have also been looking at the jeep disk brake setup and pondering how to get the emergency brake to work. A friend wanted his rear brakes on his mustang fixed so we pulled his 2000 mustang into the shop when i noticed the rear brakes and the parking brake in the caliper. Exact idea i was dreaming about after looking at the jeep calipers and parking brake assembly.

I also noticed that Dr diff sells a kit for these exact calipers for a big chunk of change. So i plan to whip out a fresh chunk of 3/8 plate and finesse it into a dd2's version of caliper mount using the base mustangs rear caliper and the rotor.

shop is a bit tight lately as my dad is building a new 10 ton 20 foot trailer. Axles will have Dodge Ram brakes (took the axles from a ram and made his own heavy axle tubes)

Will hopefully remember to take some pics tomorrow.