Should I go bigger on the cam?

Ok I am building a 360 for my barracuda. I allready bought a voodoo 268, but some other things have changed in the build. Originally I was going to run 3.55 gears and a 2800 stall converter. Now I have 3.91 gears, and a 3800 tight converter. I am thinking the gear and stall might be too much for the 268 cam. I have been looking at the comp xe282s.

The engine is .030 over 360. 9.6 to 1
ported smog heads with 2.02 160 valves (flow numbers to come later)
1.5 roller rockers
ported M1 single plane
750 holley
1 5/8 headers
also a 100-125 shot of nitrous

904 reverse vb
3800 stall
3.91 gears
25.5" tall drag radials

keep the voodoo 268 or go bigger?