Post/debate your stroker small block builds here

410" With Procharger

360 Block Bored .040 Over
Mopar Forged 4" Stroker Crank
Diamond 8.3:1 CR Quench Dome Pistons
Eagle H-Beam Rods
Edelbrock Heads Stage II ported By Hughes engines, Commetic Head Gaskets
Hughes Cam Lift .489/.524 Cam, Dur 218/[email protected] Hydrolic, Stock Rockers
Edelbrock Perf RMP Ait Gap intake
Holley 650cfm Carb Modified for Forced injection
Holley Electric Fuel Pump
Aeromotive Bypass Style Fuel Press. Regulator.
TTI Headers with 3" duals
ATI P1SC Supercharger running 10psi
Water/Meth injection Kit

Combination is extremely streetable, CAM profile is design for wide tq band and a streetable Power Band in the RPM range.
On a Dyno jet is made over 500rwtq from 3000-5300rpm
For the nonboost numbers remember this is a low compression engine designed for the supercharger....

Actual Rear Wheel HorsePower
No Boost 310HP/385tq
10psi 520HP@5300RPM/575tq@4000RPM

Flywheel Adjusted Numbers
No boost 375HP/465tq
10psi 625HP/693tq