degreeing a mp 292 509

I have degree several cam's. Not one of them was correct.
and all of them had the true roller timing sets.

There is a lot of reason why it won't be as the cam manufacture spec's it at.
1 quick reason is...........
Crank "line bored" will cause a brand new timing chain to have slack and there for not be correct with a straight up key way.

same apply if the cam bore is worked over.

What if chry mist the spec by a few thousands............

It will run just fine if you don't degree the cam
But you will get the most of the cam if you do.