Post 11 second small block combos

Ok, I get to post now.

flatTop Ross Piston, .05 in the hole 10.5:1 CR
Edelbrock Performer Heads, 63cc
Edelbrock Airgap ports matched to heads
Davinci mech sec 850cfm square (not sure of jets)
Bore 4.10
4" stroker crank steel
I-beam Rods
gasket .039
COMP cam is roller XR280R
COMP Magnum Roller rockers 1.5
COMP Roller lifters
TTI340A Headers
Kevco oil pan
727 with B&M shift Kit
3200 Stall
3" steel Drive shaft 1350 joints
Dana 60 4:10 rear
26"X 10X 15 MT street drag 20psi on the 1st run

[ame="http://www.youtube.com/watch?v=3PwKA4Wvoqo&feature=mfu_in_order&list=UL"]YouTube - ‪Duster 11.87 run.MOD‬‏[/ame]