73' B3 340 Duster pro touring build

So, I'm getting ready to start on the rear end, now that the tires are mounted I can start measuring things up. Heres some pics of what the plan is and where the direction of the car is headed. Since the rear Wilwood brakes aren't here yet, I used the front brake parts for some added bling, of course the offset is way off but you get the idea...I used AR Engineering brackets to use 11.75" Cordoba rotors with Wilwood custom shop Red rotors. The reason that thier custom is because the Part number to use with a 1" rotor does not come in red and since the rear kit will be Red, Black fronts would obviously not work here, so wilwood offers red only through thier custom shop. The wheels are Billet Specialties rallys in 17"x11" with a 4" BS. Once mounted the wheels measure 29.5" tall and 13.5" section width......Started some boring engine compartment body work now that all the welding is complete there....Ride height should be close to where the tire is mocked up, this will give me 3" of compression as long as the rear transmission/drive shaft tunnel has enough clearance.....hope you enjoy the Pics..