where to order axles

crackedback said
Can you run a rear that is 51.50 wide. That would make the short axle right about 24". Roughly 1/2" wider on each side. Save some money getting a shelf deal and maintaining the std pinion offset.

My thoughts exactly this is what he sent me Rob...

If you want to run a stock Mopar pinion offset, I would go with a 24" axle on the passenger side and a 25 3/8" axle on the driver side.

This will yield a 51" assembly width (axle flange to axle flange) and a 46" housing (end to end).

Make the driver's side tube 1 3/8" longer than the passenger's side.

Please call for more information.

Thanks,

Cass