Steering Wheel Refurbish

Okay so I figured it out. I ended up finding a center cap on eBay that showed me just the center cap came off then there are three screws below it.

I have started the process of refurbishing the wheel and it is coming out surprising well. I started by cleaning everything with mineral spirits but I think starting with a light sanding would have been better. I opened up all the cracks with a dremel. I started mixing the two part epoxy putty VERY small pieces by the way and then I simply pushed it into the cracks until it was full. I am pretty sure I am going to have to do a second layer as a finish layer. It is coming out great and I think the sanding will be pretty easy as there is not a lot of overflow.