New harness problem

Then:
The good: A while ago I managed to work all the lights out. A combination of fixing dirty ground points and no grounding at all.
The bad: The enginge wouldn´t start. All I got was a click from the distributor.

Now:
Hazard works. Turn signals work. No other lights works in and on the car works. I did the amp. meter bypass as I think somehow blow my fusable link trying to start the engine earlier. See pic.
None of the fuses are blown.

I have 12.63 volts at all (to my knowledge) necessary points. See pic.
The red wire at the ignition switch, both + and - at the coil has 12.63 volts as well.
My only concern is the brown wire from the starter relay which has zero volts at the starter but 12.63 volts at the starter relay.

And the enginge doesn´t start. All I still have is a click from the distributor.
Is it because of zero volts at the starter from the brown wire?
I took screwdriver at the starter relay and managed to crank the engine.

Why are the lights not working? I haven´t touched the wires for the lights since I fixed them.