My 67 Formula S Resto. thread

I am starting to feel like I am getting something done!!!I got the trunk pan welded in today!I test fit the trunk pan one more time and this was about 4 or 5 time.I then marked the bottom side so I knew where to drill holes.I then drilled 118 holes for all my spot welds.I scuffed all my holes and then I sprayed all surfaces that needed welded with weld through primer.Then I sanded down the bottom side of the pan and painted the back side of the tire well.Then put back in and welded it up....
Next I guess is to grind a bunch of spot welds.And the weld the rear valance on.My Uncle may come over tomarrow if so I think we are going to start stripping and priming the doors.
I work slow and this is my first real attempt a major body work.I am just doing the best that I can and I am real picky.So any advice you Guys can offer I am all ears.

Thanks,Jim