Been out of the loop for 2-3 years anything new?

Just doing a little research for a project in the future(aka probably not this year but next years) When I became "uninterested" in cars for 2-3 years here I was looking at the things id like to do to the dart to make it better/right. the things I came up with were

1. Headliner
2. Intake and Carb
3. Exhaust
4. rear end
5. Tranny(plus converter) rebuild

Im tackling the Headliner and intake/carb issue this year and probably the exhaust next year(unless something else comes up in the meantime)

As this is in the exhaust section I will ask this: In the last 2-3 years has any new headers become available that will work well(not hang too low or get bashed to death) on a 1973 Dart Sport 340/727 console shift Power Steering and brake model??

When I left for the 2-3 years all that was available that actually fit WELL at that time were TTI's and the Dougs headers....IMO they are just simply too expensive..I plan to be able to do my entire exhaust for less or what a set of Dougs or TTI's cost alone so they are out(unless I got a killer deal on used ones). so is anything else out there that works or am i gonna need to just go back to manifolds?

Right now I believe the headers that are on the Dart Sport 340 are the Headman ones that fit but they just simply hang to low and the bottom of them are all bashed to heck...I wont use them again . I have 1 side of 340 1973 manifolds and cant remember which they are as they are back in NY at the in-laws house lol. so id need at least a left or right(the other side cracked taking them off). Id just get the log type or 1973 type as the car is mostly stock and(forgive me but this is a pet peeve and just irritates me) on a mostly stock type engine there is little to no difference between the vaunted 1970 era HP manifolds and the 1973 era manifolds..I think in the MM shootout the 340 HP 1970 manifolds made a whopping 2 HP more than the later log style manifolds on a 300-325 HP engine...so not worth a "premium" IMO for the HP's from 1970..

so let me know if there is anything out there now thats come out or what I should start looking for "deal" wise for this project even though its down the road a bit.