1966 Barracuda spindle advice

Hello,

I had my UCA's ripped off by a scammer/welder and am going to order some new ones tomorrow. I'm on the fence about going to the bigger balljoint/spindle setup for a couple of reasons:

1. I just renewed my entire stock brake system (Drums) and everything is working great. Will the newer spindles still work with my 10" drums or will I have to upgrade to discs?

2. I also just refreshed my entire front end suspension. Will I also have to replace my lower ball joints to work with newer spindles too?

Thanks in advance,

-Seabee

Don't go with the big Balljoint UCA unless you are switching to BBP discs. Someone should be able to help you out with a pair of standard UCA.

66fs said:

Don't go with the big Balljoint UCA unless you are switching to BBP discs. Someone should be able to help you out with a pair of standard UCA.

Click to expand...

BBP=big bolt pattern?

1. I don't believe they will work someone correct me if I'm wrong.

2. Your current lower ball joint will not work with the big ball joint spindle.

yes, bbp=big bolt pattern. yes you need new lower ball joints with disc brake spindles....your current drum brakes will not work with disc brake spindles because they use a different wheel bearing, which are bigger...