Distributor out of my stroker, it has about 1000 miles on it. I upgraded to an MSD Pro billet, so this one works just fine and has NO issues. It has the ignition module with it. I took the module out so I could run this with my 6al box, hooking it to the CD is very simple; two wires of the same color. The ignition module is a four post, I dont remember which post gets which wire, but it wouldnt be too hard to figure out. When I was running this one, timing would start to come in at 1000 rpm, and add another 10 degrees and be all in by 1700 rpm, so it has a very light swing. Cap and rotor have light wear, but still very usable. I have provided a link to the EXACT same distributor for a reference. Located in Tulsa Oklahoma, 74055 40 bucks plus shipping.
