Neutral Safety Switch wiring

67Dart273 said

Do they all have the same brightness when flashing? That is are you sure it is the "big" filament blinking and not the tail/ park? You could either have a shorted bulb, or a cross in the harness somewhere that is interconnecting the tail/ park and turn circuits

Click to expand...

They all have the same brightness. Did some more troubleshooting and have narrowed the problem to the parking lights circuit, and here's why: with all lights hooked up and none on-hit the turn sigs and the hazards come on. Turn the parking lights on(and they DO come on) and then hitting the signals does nothing(front or back) and headlights on is the same(but again; they DO work). So I unhooked the park wires and left the turn signals wired hooked up. Hit the signal lever, and all the signals work. But if I have the lights on, WITH a signal flasher going, and touch a Park wire to it, it stops flashing and just stays on. So obviously the park light circuit is all jack'd up. But I haven't the slightest clue where to start solving the issue...and it looks like its just you and me on this one Dart; so don't give up on me now!

:hippy2: