Relay Enclosure

Part of the reason my relays are so close to the alternator is the main power supply. The water tight maxi fuse holder ( barely seen in the pic ) has approx. 6 inches of #6 AWG lead each side Reaches just to the distribution block under the cover. Ample space for more relays. 2 more planned are heater blower motor and a/c clutch. Relays and connectors are all the same type/size so they are interchangeable incase one should fail.
I would temporarily forfeit the horns for low beam lights if the need should arise. Only the relay connectors are labeled.
All connections are continuous unbroken wire from female relay connectors' terminals to those female terminals at the component end. All in all, I'm pleased with the setup.