Aloha from Maui

To take it out above, remove rad, maybe remove grill if you're worried about bumping it and cracking it, disconnect all electrical from engine, disconnect shifter linkage, remove driveshaft from yoke (I'd keep the yoke in the tranny so you don't lose tranny fluid everywhere), unbolt exhaust from manifold, and unbolt engine from motor mounts. Use an engine hoist, and put a bolt in the front and rear of the head through a chain, to use with your engine hoist. Lift slowly, and have someone else with you to guide the tranny out after the engine, careful to not smack anything. Good luck, hope I didn't miss anything.