Oil Leak

I filed/sanded down the area I used the JB on and was able to reshape the distributor flange around the block. I used a ball of duct tape and reversed the tape on the top and it caught all the filings and vacuumed the rest with a shop vac. Nothing got into the intake. I then put a light bead of sealer around the base of the dist, dropped the dizzy back into the block and bolted it down and fired it up and there appears to be no leaking. I revved it up and watched around the dist/manifold area and saw no oil leaking. I drove the car around the block and back in the driveway and opened the hood and no leaks. I will take the car out on the open road tomorrow and see how it looks. I am using a copper tube on my oil sending gauge so there should be no issues with that line. That JB is the stuff. It is nice that you can work with it and actually form it and adheres to steel so strong, I highly recommend it to anyone who needs to fix anything steel. I will post back tomorrow on how it is looking. The Distributor looks like it is seating flat to the block and the mirror works awesome to verify this. Thanks Rob and Tracy and everyone else for your advice and assistance. Man I would be lost without FABO!!!!!