Voltage to coil

OK, so I started from square one. Pulled the dark blue line that didn't have voltage and pulled all plugs off the coil side and turned the key on. Got about 12 volts on both sides of the resistor. So then I connected up the brown wire and it stayed at 12 volts on both sides. I then added the wire that goes to the coil and it dropped down to 4.6 volts on the coil side and 11.4 on the other. I then removed the wire that went from the + post on the coil to the electric choke and the voltage went up to about 5.3. I am not sure if that is telling me everything is OK? My son just went to bed, so I can't crank it over to see if it starts up right away or struggles like it has in the past?