any interest in Fab alum rocker covers??

-
DartNByYou

DartNByYou

Bit by the Dart
Joined
Nov 16, 2010
Messages
52
Reaction score
0
Location
orange county
just wondering what the interest is on fab alum covers. might think about getting one made and see what it would cost for a run.

$(KGrHqR,!hgE3vjSSY6nBOOI,gdFOw~~0_12.JPG
 
I've got a polished Offy VC,but that is sweet !!! Count me in !!:love4::love4::love4::love4::love4: Can you explain the 3/4 other holes ??And how about a PCV provision ?
 
If you go forward with the project, PLEASE double-check the welds. I can't count the number of brand new fabbed valve covers manufactured just since this style got popular that were shipped here directly for coating. I've gotten in the habit of holding them up to the sun ... all but one set had holes in the corners.

Oh crap, Building Inspector's on the way to sign off on the lean-to building permit. Gotta split vrooooooooooommmmmmmmmmmmmmmmmmmmmmmmmmmm
 
CudaChick1968 said:
If you go forward with the project, PLEASE double-check the welds. I can't count the number of brand new fabbed valve covers manufactured just since this style got popular that were shipped here directly for coating. I've gotten in the habit of holding them up to the sun ... all but one set had holes in the corners.

Oh crap, Building Inspector's on the way to sign off on the lean-to building permit. Gotta split vrooooooooooommmmmmmmmmmmmmmmmmmmmmmmmmmm
Click to expand...

Watch for any holes Leanna !!
 
Another consideration with this project is the baffle, PCV provision and high lift cam/roller rocker provision.
Just my 02.
Frank
 
I would be interested......but I have a 590 lift cam, and roller rockers, so maybe taller than normal.
 
Another interest in the Valve cover, Jump in when you can and update us on the build, and PCV provisions and baffles would be a must for me.

Yet, I do love my original :D
powder coating would be in my planes again CudaChick1968
 

Attachments

  • Computer%2520Repair%2520Ken%2520Slater%2520081.jpg
    140.7 KB · Views: 244
  • Getting%20things%20started%20to%20run%204%20barrel%20106.jpg
    113.1 KB · Views: 250
Kidd said:
I would be interested......but I have a 590 lift cam, and roller rockers, so maybe taller than normal.
Click to expand...

that and also using locking adjusters... i used ones from a hemi and they are about a 1/4" taller...
 
Cost doesn't seem to be the factor,it's the lack of response to all the posts !!!:banghead:
 
You must log in or register to reply here.
-

Back
Top