Buyer beware!

i feel for you i had the some thing happened to me 3 times. the first was indy (thyeyreally suck to deal with) not setting my k-motion 1000 up correctly on thier 440-1 heads. not by a little but by 1/8" on the intakes and 1/4" on the exhaust. then i paid wynn's performance out of belle glade, florida for 16 new valves plus the labor to replace all of them because they bent from not enough seat pressure for the roller cam. not to be out down by themselves the a$$ hats set the valves up the same way after being told to set them at 1.90" and they set them up just the way indy did. of course they all bent too so i had them put in another set of 16 not knowing what was go on just yet. well a few weks ago i found out that they are just a crap performance shop and screwed me over twice, the bast@&%s. so now i'm waiting on a new set of valves and i'm glad i'm up here in north carolina. not being set up correctly cause them to sit on the seat with less then 150lbs. so there was no way that the springs could control the valves with no seat pressure. not having the correct valve spring compressor to do my own work was the refason i had wynn's do the job. now i have the compressor and tester so i can do the work and it'll be right.