67 Cuda 5.7 Hemi Tranny Advice Needed

If you do some research on the tunnel mods, you'll see that there is NO WAY that the 545 is going to fit without major surgery. You won't be able to move the engine far enough forward.

Also, yes, Chrysler did make a 727 variant with an overdrive, the early 90s versions are almost all hydraulically operated. You do however need to cut the floor a little to get it to fit. Over at Hot Rod they have an article about the installing both the new hemi and the A-518.

http://www.hotrod.com/howto/hrdp_0706_hemi_swap/index.html

The only three ways to get an overdrive without cutting the floor are to use a Gear-Vendors unit, or you can use one of the New Passon Performance new five speeds manual. I am dubious about Kessler's kits.

Regards,

Joe Dokes