Stalls on idle in gear

Suspected issue was found... #3 cyclinder came back at 40% in the leak down test. But the compression in the cylinder was okay.

All other cyinders were just under 20%..

Earlier this season I had a rod go in #3 so defenately something there not right..

However we put a different 600cfm carter on it today and messed with the timing again.

To get it to run in gear on idle we are 18 initial and total 36. This will do for now before I decide over winter what top end changes I will do.

It is running in gear at idle now... there is a miss in #3 as the intake valve is not closing all the way on idle but does in higher RPMs...

So this is fine for now... future changes are going to come....

Happy we got it to run for now...

Thanks for all the inputs