Question on 70 Dart wheels

-
1

1bad442

Well-Known Member
Joined
Jun 15, 2011
Messages
49
Reaction score
1
Location
York, ME
On a 70 Swinger 340, this car would have come with the 'small' bolt pattern, right? Looking at wheels, and the offer both large and small.

Also, I want to go with Mopar steel wheels with repo dog bowl hubcaps. Will they fit on the 15's? The hubs would be identical I would think as on the 14's.

I want to go 15x8's on the rear, and 15 x 7's on the front. Does all of this sound doable? Thanks everybody.

Steve
 
Thanks, I'm Ok with where to get what I need. It's what I need that I'm not sure of.
 
dog dish caps will fit on 14's or 15's....dont matter.

1970 dart had small bolt pattern.

make sure u have the correct backspace so everything fits..
 
A 70 Dart would have come with small bolt pattern wheels. It would be a good idea to measure the hubs to make sure they still are. Lots of them have been changed in 40+ years. It would be disappointing to get the wrong wheels.

I've swapped several cars over myself, and I've even bought a couple in my day that had already been switched over, including the current project Demon.
 
Yes, your car originally had the small bolt pattern. Wheel Vintiques only has small bolt pattern ralleys, although they do offer 15" wheels, which ma mopar never offered. If you want 15" steel wheels in small bolt pattern with dog dishes you'll have to have a set made. If you convert to big bolt pattern (5x 4 1/2) then the sky's the limit when it comes to wheel choices. Wheel Vintques does offer the 3 nub steel (for dog dishes) wheels in 15" in big bolt pattern. As suggested above, measure yours first. Should be 4 1/4 (although wheel vintques lists them as 4", but 4 1/4 is correct)
 
You must log in or register to reply here.
-

Back
Top