cam selection

Just lost a lobe in the 275H, had a nice bubble in the casting at the top of the lobe, COMP said they will warranty it, but the engine got a USED 276 voodoo with 70,000 miles or so instead.....

I have built 318's and 360's with the 284.... It's OK..... Doesn't make the power one would think in a 360 being such a decent duration IMO, the 224* 465 lift solid we replaced it with ran better. (had a lifter with bleeding issues and it would hammer at start up, so I convinced one more guy to run solid........)

It was in an 81 D100 short box, with a 2800ish converter, was streetable, sure, 3.91's worked great too, had a air gap intake, mildly ported J heads, 9.8-1 compression.

If your not totally stuck on comp, but have to have an off the shelf cam, take a gander at the lunati voodoo cams, they run the same on top with a harder hit down low.

Sorry I ain't got a 340 layin' round with one for ya.