Andrev8 said

Hi folks. This is my first time in this forum.

I'am rebuilding the front suspension of my Brazilian made 79' Dart. Our suspension design is very similar with american 68' Dart. All my friends that have rebuild suspension, based on this and have success. Well, I want a good handling street car, and some times beat some Chevys and Fords. In the next three years it will have about 400 hp.

I need help to make a decision. I already bought some parts in Summit site. The numbers parts are:
AXT-2266;
ENS-5-13101G;
ENS-5-18104G;
ENS-5-5135G;
KYB-KG4509;
KYB-KG5511.

My next step is to buy an Front End kit with: Upper and Lower Ball Joints, Upper and Lower Control Arm Bushings, Strut Rod Bushings. All (4) Tie Rod Ends, Upper and Lower Bump Stops and Idler arm. Initially I was thinking to put all Polyurethane bushing that i bought and by a PST Polygraphit Front End Kit, but some friends told me that the car will be very hard and uncomfortably. They said to use a rubber front end.

So, what to use? Need some indications because import parts are expensive to me. If I can do right at the first time, that´s i want.

Help me please.

Thanks to all.

My Mopar:

Click to expand...