well i tried it again, still nothing. trans is bolted up, engine hanging on the hoist, lowered it down untill everything clears, not even the stock motor mount will work, there was not enough room between the motor mount and the k-frame to install the biscuit mount. the motor had to be lifted up....
i have the motor mount brackets loosly bolted to the block, all bolts are in, but just loose so the bracket can move. both mounts are like that which would allow the engine to settle where it needs to be once i slowly lower the enigne down with the hoist..still, the headers hit the torsion bar, and just slightly rub on the steering box....i honestly cant think of any other ways. ive exhausted all my other resources, dunno now...
maybe ill just go with it and let the f*%#ers rub on everything. at this point i dont give a ****....
