I recently bought Moser axles for my 68 Cuda and got the 4.5 bolt pattern but to use with redrilled brake drums. Will your setup work with these axles?
thanks, bruce
I am going to assume you have the a-body axles in your application since you have re-drilled the flange. From my understanding the a body axle flange is about 1/4 of an inch shorter than the regular 4.5 inch bolt pattern from any other vehicle.
I can either
1) modify the mounting brackets to make the re-drilled axle flange work
2)I already supply shims to move the calipers in or out depending on the setting of the stock adjustable bearings. So i could add in more shims.
I personally would prefer to modify the mounting brackets. But i do not have any stock a body axles to take measurements and mock up to be sure it would work in that application.
