Compression Check low oil pressure Now What?

Like SG said - compression numbers are great. Which means ring seal, camshaft, and valvejob are all fine. The oil pressure is low...
The cam bearings were suggested because the oil that feeds the main bearings, and then the rod bearings, goes behind the cam bearings. So if there was a worn cam bearing, the oil pressure has the possibility of bleeding some through that extra clearance.
I myself have never seen that, but I'm open to it being possible because of how the system gets oil to the crank. IMO, the mains and rods are probably just worn. You can inspect them as SG also soggested, or you can simply try to push more oil through the extra clearance. If the engine runs ok now, but the pressure is low pretty much all the time, the High Volume oil pump may make the situation bearable for a while. It's not a fix. It's a rigging job to buy some time. But, it has worked for me in the past.
Just keep asking the questions... Once a question is answered some of us tend to not keep expanding on something.