Floor pans. gulp...help...

What do you have for tools for starter.....A good mig welder, grinder . You will need some thing to cut the pans I used a cut off tool and a air chisel with sheet metal bit, or a thin cut off blade on a grinder works but is scary LOL Also the old pans are welded to certain parts of the frame areas if you have access to an air chisel with the spot welder remover bit, they work slick... Do a search for crackedback and look at his pans that he cut out you may get a good idea I pulled the steering column out cause I kept hitting my frigging head on it every time I moved...I also removed my brake and gas pedal.... remove the wring that goes down the car, The pans are spot welded along the right and and left hand sides.... The worse part for me was up where the lip fold over the foot well...mine was rotted pretty good and I had to fab a few pieces...But better than cutting them and parts them out....Also make sure you check your torsion mount area now is a good time to replace them. I belive crackedback has them for sale aswell